• एेंगल प्लेट • कोण पट्टिका | |
angle: कोना बंसी कोण कोना | |
plate: फोटोग्राफी की | |
angle plate मीनिंग इन हिंदी
angle plate उदाहरण वाक्य
उदाहरण वाक्य
अधिक: आगे- An angle plate was used to help support this load.
- Joints are secured with screws and angle plates.
- Its hull and turret are fully covered by a superstructure built of angled plates made of radar absorbent material.
- The angle plate is made from high quality material ( generally spheroidal cast iron ) that has been stabilized to prevent further movement or distortion.
- Indoor ranges can use angled plates with collectors, often with a rubber curtain through which the bullet passes and is then stopped by a metal plate.
- The C model had a large production run, but was quite complex to build, involving many angled plates that gave reasonable protection from small arms fire.
- Various developments followed, with cast iron plates laid on top of the wooden rails and later wrought iron plates or wrought iron angle plates ( L-shaped plate rails ).
- The work piece is held against an angle plate so that it is perpendicular to the surface plate; the scriber block is then adjusted to the required height and used to scribe a line parallel with the table, by sliding the block along the table's surface.
- Slotted holes or " T " bolt slots are machined into the surfaces to enable the secure attachment or clamping of workpieces to the plate, and also of the plate to the worktable . Angle plates also may be used to hold the workpiecesquareto the table duringmarking outoperations . Adjustable angle platesare also available for workpieces that need to be inclined, usually towards amilling cutter.
- Three of these are labeled as " mDH qdw " " supervisor of sculptors . " On the adjoining east wall, near another seated portrait of Khnumhotep, a carpenter makes a furniture item probably used at banquets : a portable wooden recliner or backrest, an angled plate set on the ground or on a bench to lean against, so that one is lying down with upper body propped up.